Summary Summer has arrived, rain weather began to rise again, in case of rainy days after the use of electric sightseeing vehicles, how to do?
Summer has arrived, rain weather began to rise again, in case of rainy days after the use of electric sightseeing vehicles, how to do?
The electric sightseeing vehicle is started by the controller. Once the controller is wet by water or rain, the controller will be unable to be used, causing the vehicle to fail to start.Therefore, we need to pay attention to the water intake of vehicles to take preventive measures, in order to better use electric sightseeing vehicles.
On rainy days, electric sightseeing cars and other electric vehicles will suddenly fail to operate. The reason is mostly due to the water in the controller, resulting in the short circuit of the circuit in the controller.In rainy days, the water inflow of the controller often occurs. In rainy days, when the tire turns, there is water in the tire. In general, the controller is close to the tire and is not completely sealed.While some controllers are under the car body, near the ground, when the electric sightseeing vehicle passes through the water pit and other places, it will be immersed in the water, causing rain to enter, which will also cause short circuit of the circuit in the controller.
In these cases, if the water in the controller is not too much, the electric sightseeing vehicle only needs to turn off the power supply and put it in a relatively dry place. After the water is discharged, it can be used normally. If the controller is filled with a lot of water, it may need to be repaired.
The controller, as a necessary part of the electric sightseeing vehicle, is very important to discharge water because it is an electrical equipment. Once it encounters water, it will be easily damaged.Especially in rainy season, although the vehicles have been waterproof, sometimes a little water will inevitably infiltrate into it, so please be sure to prevent water from the controller during rainy season.
