Summary The solar panel street lamp mainly receives light through the battery panel, so as to realize the photoelectric conversion in the back and successfully make the light source light up. If the battery p
The solar panel street lamp mainly receives light through the battery panel, so as to realize the photoelectric conversion in the back and successfully make the light source light up. If the battery panel is not installed properly, it is likely that the desired lighting effect will not be achieved.
This installation not only refers to whether the components are loose, or whether there are obstructions on the top, etc., but also the installation angle, some safety devices on the top, etc., must not be sloppy. Then, what problems should be paid attention to when installing the street lamp solar panel?
Choose the frame material Street lamp solar panel frames are often made of some steel materials. In fact, some of the properties of this kind of material are not very good. To ensure its use effect, it is generally hot-dip galvanized to improve its corrosion resistance, etc. However, some solar street lights In order to save costs, manufacturers will use cold galvanizing treatment. The coating layer treated in this way is very thin and the corrosion resistance is not good. Pay attention to distinguish.
If it is in some coastal cities where the salt spray is heavier, it is better to choose stainless steel or heat-treated aluminum alloy, which has higher corrosion resistance and high durability. If it is a city like Yichang, the environment is more suitable. , In the choice of the panel frame, you can choose according to your actual needs.
In addition, in addition to choosing a good frame material, it is necessary to ensure that the frame and the foundation are welded or installed firmly to ensure that the solar panel has sufficient strength and stability to resist weather such as strong wind or snow. After all, the place to install the solar panel is It is best if there is no obstruction.
