Industrial Refuse Treatment Incinerator

Feature of Industrial Refuse Treatment Incinerator

The Industrial Refuse Treatment Incinerator designed by ourselves own the feature of zero failure,low rate of failure, low cost of maintenance and operation.
Negative pressure design, non-backfire, continuous material feeding, large quantity of treatment, perfect off-gas purification system to ensure the emission standard for environmental protection; small occupied area, less investment, easy operation, high degree of automation.

Application of Industrial Refuse Treatment Incinerator

industrial wastes (macromolecular wastes): plastics, PE, PU, rubber (tire), EPS, PET bottles, fibers, foams, cloth, resin, PMMA, leather, cow leather chips, laminated boards, phenolic powder, urea powder, scouring pads, audio tapes, paints, polymers, etc.
Medical wastes: infective wastes such as needle cylinders, gloves, wrapping tapes, gauzes, blood transfusion tubes, organs.
General wastes: paper boards, paper scraps, wood chips, leaves, etc.
Special wastes: waste oil, waste solution, sludge, ash, paints on iron, residual slags of molds and filter nets, etc. No need for combustion aid, self-combustion of wastes (calorific value: 3000kca/kg), recovery of a big quantity of hot water and hot air for power generation.

Parameters of Industrial Refuse Treatment Incinerator

1.Daily capacity of Industrial Refuse Treatment Incinerator: 5~100tons(the capacity can design by customer's demand)
2.Furnace chamber temperature: 600°C~900°C
3.Flue gas retention time: ≥3s (above 1100°C)
4.System control way: automatic
5.Dust-removal way: biochemical filter, cyclone dust catcher and baghouse filter

Pictures of Industrial Refuse Treatment Incinerator